Flawless Sikkens Staining on 5000 Sq. Ft. in Squamish, BC.

This commercial painting and wood staining project took place in Squamish, BC, involving a 5,000-square-foot municipal property owned by the City of Squamish. The job was completed in two weeks with a total cost of $14,500.

The building featured extensive natural wood surfaces that had become faded and weathered over time. The goal was to restore and protect the wood using a semi-transparent oil-based stain that would bring back its warmth while maintaining a natural appearance.

Colour Craft was contracted to handle the full surface preparation and finishing of multiple wood components, including siding, trim, posts, doors, railings, and upper peaks. The structure’s elevation and architectural layout required careful planning for access, efficient staging, and controlled application techniques to ensure even coverage and long-term performance.

This was not a repaint — it was a surface restoration and protection project, designed to extend the life of the wood and maintain consistency across different exposure areas of the property.

Project Overview

Exterior Commercial Painting

Squamish, BC

2 Weeks

Benjamin Moore – Sikkens Cetol SRD RE (Oil Based)

$14,500

The City of Squamish reached out to Colour Craft after noticing that the building’s exterior finish was showing significant fading and patching from UV exposure. Some areas had absorbed more sunlight and moisture than others, creating uneven tones and a dull finish. Their facilities team wanted a solution that would restore the original look of the wood while providing durability against the coastal climate — an issue common in the Pacific Northwest, where moisture and temperature swings can quickly wear down untreated wood.

They selected Colour Craft because of our experience with high-end wood staining projects and our ability to deliver precise color matching and consistent finishes on large surfaces. During the initial assessment, our team provided stain samples, discussed texture preservation, and confirmed the application process that would best suit the building’s existing condition.

The client’s priority was clear: restore the natural appearance without making the finish look too heavy or artificial. That required selecting a semi-transparent oil-based system that could penetrate the wood effectively while enhancing the tone.

Commercial Wood Staining in Squamish, BC: Services Provided

Every section was handled separately to maintain even application, correct absorption, and a consistent finish across varied wood types and exposure conditions.

Materials and Process

• Sikkens Cetol SRD RE (Oil-Based): Used as the primary stain on all wood siding, trim, and railings. Chosen for its penetration strength, UV protection, and semi-transparent “Natural” finish, allowing the wood grain to remain visible.

• Benjamin Moore (Supplier): Provided the materials and technical support for color mixing and product specifications.

• Surface Cleaning Solution: Used prior to sanding to remove contaminants and residue buildup for proper adhesion.

• Fine Sanding System: Applied throughout the project to smooth surfaces and open wood pores before staining.

All materials were selected to match existing coatings, maximize durability, and ensure compliance with the manufacturer’s recommendations for exterior wood systems in humid or coastal environments.

Transformation Highlights

Before Colour Craft began, the building’s wood surfaces showed clear signs of weather fatigue — uneven color, graying tones, and visible patching where older coatings had failed. After meticulous preparation and a controlled staining process, the transformation was dramatic.

The new finish restored the warmth and natural grain of the wood while giving it a uniform tone that looks both modern and timeless. What had once appeared tired and neglected now looked revitalized, rich, and well-protected.

Outstanding Results They Love

The project outcome exceeded expectations on every front. The City of Squamish’s facilities management team praised Colour Craft for our attention to detail, careful scheduling, and clean execution. The final result offered a high-end finish that balanced aesthetics with longevity, reducing future maintenance costs.

The new surface coating not only looks exceptional but will also withstand local weather conditions — from heavy rain to direct sunlight — maintaining its appearance and protection for years to come.

Inspection after completion confirmed uniform absorption, no streaking or lap marks, and excellent adhesion across all wood types. These are the measurable outcomes that define Colour Craft’s commitment to craftsmanship.

Our Promise to the Community

At Colour Craft, every project is more than a contract — it’s a commitment to enhancing and preserving the spaces that define our communities. The City of Squamish project reflects that promise. By restoring the building’s natural wood façade, we helped maintain one of the town’s valued properties while ensuring it remains structurally sound and visually appealing.

We take pride in using high-performance coatings, sustainable preparation practices, and precision-driven craftsmanship that benefit both our clients and their communities. Whether it’s a municipal restoration, a commercial repaint, or a residential upgrade, our goal is always the same: deliver results that last longer, look better, and build trust with every finish.